Volvo RTI Instruções de Operação descarregar pdf (Página 16)

Now we have the TV unit without AF. As you can see we had an extra PC Board on our unit, some are

with and some are without. If you have with just cut the cables from the small PC Board going into the

main Board and isolate the ends with some electrical tape.

Then you take a connector and solder it to the connector PIN 1, 4 and 5. PIN 1 is signal ground, PIN 4 and

PIN 5 is signal IN Left respective Right Channels. You can use whatever connector you prefer as long as

it fits together with the pins in the connector on the main board, but you have to have the female side too

as that is to be connected in this connector.

Take away 2 screws and take out the PC Board.

Save the PC Board together with the Display

from RTI unit in case of reversing the unit to

original.

PIN 5 - PIN 4 - PIN 1

Cable coming from NAV

Voice Guide Sound

This end will be connected to NAV (Voice Guide Sound

out) in the dash board where the RTI unit is.

The cable has to be placed under the carpet from the

back of the car to the front.

This was the first part and now you have the

opportunity to get sound out from NAV but only

in TV mode.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Volvo RTI Instruções de Operação Página 16