Volvo RTI Guia de Instalação descarregar pdf (Página 8)

Page 8

Replacing Factory Peripherals

All iMIV devices were designed to utilize the same high quality connectors the Volvo uses for their

peripherals. If you are removing factory Satellite Radio, a factory iPod adaptor or a TV Tuner it is possible

to reuse the original power and Melbus cables.

It is not possible to reuse the original iPod cable from the factory adaptor however. Please note that the

TV Tuner must be removed for all iMIV/MII installations.

Special Operations

Reversing Camera Installation

The high quality ‘X1’ reversing camera available at our website is plug and play for all DVD RTI based

installations. If you purchased an iMIV Classic you will need the iMIV Classic Reversing Cable PN: 24-CA-

BKC-06. LE series devices utilize the round black connector on the power cable that is included in all DVD

RTI installation packages.

1) Mount the reversing camera using either the included screws or double sided tape. Commonly

used is the ridge by the license plate.

2) Route the cable to the location of the iMIV/MII. If you are using an LE series device simply

connect the small round connector to the black connector of the Power and Camera harness.

This provides power and video to the camera.

3) For iMIV Classic devices connect the round camera connector to the round black connector of

the 24-CA-BKC-06 harness. Plug the green connector into the iMIV Classic port labeled ‘Camera.’

4) Apply the reversing camera firmware patch – available at www.imiv.ca – to the iMIV/MII. This

allows the iMIV/MII to override any video feed going into the RTI screen when reverse gear is

selected. This patch is applied like standard firmware; please see the operation manual for

details on how to do this.

5) Reinstall any removed trim panels.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Sem comentários

Volvo RTI Guia de Instalação Página 8